Here is the start of our all aluminum build, Ephasis, this bike will be finished in clear powder coat, with only the seat, rubber and engine being black.
![](http://3.bp.blogspot.com/-QWCVEpnhy-E/UJGMyWRLD-I/AAAAAAAAAi4/NcCjALEr6NQ/s320/pic+081.jpg) |
Turning the steering neck in our CNC lathe |
![](http://4.bp.blogspot.com/-_i0IvTFlNNs/UJGM0YuszjI/AAAAAAAAAjA/o2R8c_iF5qo/s320/pic+084.jpg) |
The steering neck on the left is a standard steering neck for a custom
v-twin bike and the one on the right is for the aluminum build! |
![](http://1.bp.blogspot.com/-PsSIfA7U3uY/UJGMZpt4WtI/AAAAAAAAAhE/E469tqSRye8/s320/DSCF8113.JPG) |
Preheating the neck so it can be properly welded to the thinner back bone |
![](http://3.bp.blogspot.com/-eHCPJUt8U14/UJGMv-JfGLI/AAAAAAAAAiw/zi8eDSarvWk/s320/P1100494.JPG) |
Our jig table allows us to build the jig with the bike as we need |
![](http://4.bp.blogspot.com/-WHbRVqkOzuk/UJGMcHxMAAI/AAAAAAAAAhU/cnWI1auN7-E/s320/DSCF8209.JPG) |
Ready to be welded |
![](http://2.bp.blogspot.com/-021DfXz1QF8/UJGMj_Yh90I/AAAAAAAAAiQ/yE1h8uFFCvU/s320/IMG_0267.JPG) |
The frame getting final welded |
![](http://3.bp.blogspot.com/-7wT9G74bXu8/UJGMe6yo4XI/AAAAAAAAAhs/xythGztwcTI/s320/DSCF8242.JPG) |
All welded up |
![](http://1.bp.blogspot.com/-ehnLt8Y2mUA/UJGMsF0YApI/AAAAAAAAAig/-WzS8RfFd8s/s320/IMG_0457.jpg) |
Power Plus 100 Indian motor |
No comments:
Post a Comment